| Details: | Description
Introducing the GameMax Prism, unique design and exceptional functionality, these are the characteristics that GameMax have chosen to define the Prism. The Prism has a striking front panel with a triangular ARGB infinity mirror effect results in an aesthetically appealing chassis.
This stylish gaming case does not stop there with eye-catching angular aesthetics complete with cut-outs help the Prism to reach it’s full potential. Three pre-installed 120mm fans mounted on the top and rear of the chassis which is also equipped with sleek infinity effects illuminates the spacious interior of this exquisite Mid-Tower. On top of the three pre-installed fans there is room for another five to fully populate the Prism and three water cooling locations with a 360mm radiator the largest that can be installed this case is full of cooling capability.
Stand out with the touch of Infinity, the circular-shaped infinity mirrors at the centre of the fans create a mesmerising LED lighting display with their multi-layer effect. They not only look fantastic but also ensure all components are taken care of for when it comes to keeping temperatures balanced & conditions optimised for a peak performance.
Your hardware is on show thanks to the tempered glass side panel it leaves little hidden, moving onto the top of the case the I/O panel provides USB3.0 and USB2.0 connections & inside is a PWM ARGB hub with LED lighting controls with access to approximately 40 LED modes or 16.8 million colours using a compatible addressable RGB MB.
Measuring 46cm in height, the all-black interior & full PSU shroud add to the smooth and unobtrusive look. It can fit a graphics card up to 32.5cm & behind the MB & PSU shroud up to 3 x 2.5” / 2 x 3.5” drives. Top & bottom removable dust filters help keep your rig clean, with room in the shroud for an ATX PSU up to 165mm with cables easily hidden from view.
Overall the GameMax Prism distinguish itself with its state of the art yet functional design.
Key Features
Modern Aesthetics - Triangular shaped cut-out with infinity mirror effect and ARGB lighting, the infinity mirror effect set on the front panel through the tempered glass provides users with a luminous visual experience. The front panel looks sharp and has the edge with a high airflow front panel design maximises cooling performance.
Stylish Cooling - Stand out with the three PWM fans included, mounted on the top and rear of the Prism. The ARGB infinity mirror plus cooling fans can be controlled via connection to your Motherboards 3-Pin 5VDG or via the I/O Panel. The Prism uses the best infinity fans, these are three-sided infinity ARGB fans, the touch of infinity, the circular-shaped infinity mirror at the centre of the fan is created to have multiple layers spaced approximately 0.5mm apart. The multi-layer effect creates a mesmerising LED lighting display.
Extra Infinity - Surrounding infinity trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the inner-ring and outer-ring ARGB lighting that creates a 3D indented look.
Side Frame ARGB - The ultimate ARGB fan with an inner and outer ring has two embedded LED lights on both sides of the fan blade.
Fan Controller Included - A PWM hub is included inside the Prism which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and it's connected to the Motherboard using a single cable - you can setup without any additional cables.
PWM Fan Control - The hub can be connected to the CPU fan interface on your chosen Motherboard to access temperature readings. An increased CPU temperature increases the fan speed automatically and swiftly cools the system down. Conversely when the CPU temperature decreases the fan automatically slows reducing the overall noise.
Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
VDG Connector Included - A 3pin VDG connector is included which is intended for use with older Gigabyte and Aorus Motherboards.
Tempered Glass Panel - The tempered glass side panel offers an unobstructed view of the interior and shows off your system build. It allows users to enjoy a panoramic view of the lightning.
Hardware Orientated - The interior comes entirely in black and with a full-length PSU shroud that only adds to the stylish and unobstructive look. A dedicated PSU Shroud that is made with solid steel panelling that perfectly covers the cables, showcases the PSU specs and contains a hard drive mount. Behind the shroud is where users will find space for one 3.5” HDD and two 2.5” SSDs can be installed next to the Motherboard. Located on the top of the PSU shroud there is space for one 3.5” HDD or one 2.5” SSD (Only can be installed if no cooling fans are installed). The Motherboard tray and PSU shroud both offer a number of openings for optimum cable management with up to 20mm cable management space. Underneath the case is a removable dust filter suitable for a full sized ATX PSU up to 165mm long.
ATX Housing - Standing at 460mm high, 200mm wide and 373mm deep the Prism is compatible with a wide range of components, with 325mm of clearance for GPUs and it can facilitate CPU coolers up to 165mm tall. Additionally the I/O panel located at the front possesses one USB3.0 & two USB2.0 ports, HD-Audio, Mic & LED / Reset button. There are seven expansion slots on the rear panel for PCIe devices.
Specifications
| Chassis Dimensions (Excluding Fascia / Panels): | (W) 200 x (H) 445 x (D) 330mm | | Water Cooling Support: | | | Front Supported Radiator(s): | 120mm, 240mm and 360mm | | Top Supported Radiator(s): | 120mm and 240mm | | Rear Supported Radiator(s): | 120mm | | 3 x 120mm Fans Included: | | | Fan Powered Via: | 4pin PWM | | Fan LEDs Powered Via: | 3pin AURA | | Fan Controller Support: | | | Fan Controller Included: | Yes | | Fan Controller Power Via: | SATA Connector | | LED Controller: | Yes | | Fan Power Connector: | 3 or 4pin | | LED Power Connector: | 3pin AURA | | Fan Control Via: | LED Button (Reset Switch) or MB Sync | | Supported Qty of Fans (Max.): | 6 | | Supported Qty of LEDs (Max.): | 6 | | Additional Chassis Specifications: | | | Motherboard Max. Size: | (W) 310 x (D) 250mm | | PSU Max. Length: | 165mm | | Dust Filters: | 2 x Top & Bottom | | Packaging Type: | EPE Foam | | Packaging Thickness: | 36.70mm |
Case Specifications
| Form Factor: | Midi Tower | | Motherboard Support: | ATX, Micro ATX, Mini ITX | | PSU Support: | Standard ATX | | PSU Location: | Bottom | | Gaming Case: | Yes | | Water Cooling: | Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Front, Top | | Body Material: | 0.5mmSPCC | | Front Bezel Material: | ABS & Tempered Glass With Infinity Mirror | | Side Panel: | Tempered Glass | | Internal Cable Management Depth: | 20mm | | External Bays: | | | Internal Bays: | 2 x 3.5” Internal
3 x 2.5” Internal
| | Drive Bay Notes: | 1 x 2.5" Shared with 3.5" | | Expansion Slots: | 7 x Full Size
| | Cooling Front: | Space For 3 x 120mm Fans | | Cooling Top: | Space For 2 x 120mm Fans (2 x 120mm PWM ARGB Infinity Fans Included) | | Cooling Rear: | Space For 1 x 120mm Fan (1 x 120mm PWM ARGB Infinity Fan Included) | | Cooling Side: | None | | Cooling Bottom: | Space For 2 x 120mm Fans (On PSU Shroud) | | Fan Controllers: | 1 Fan Controllers, controlling up to
6 fans in total | | IO Ports: | 1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone
| | GPU Max Length: | 325mm | | CPU Cooler Maximum Height: | 165mm | | Front Bezel Colour: | Black | | Body Colour: | Black | | System Cabinet Features: | | | PSU Included: | No |
General Specifications
| Manufacturer Part Number: | GMX-PRISM | | EAN Number: | 6931858778237 | | Has Mains Plug: | No | | Colour: | Black | | What's In The Box: | Case
Accessories | | Unit (Product) Dimensions (mm): | 200mm x 460mm x 373mm (W x H x D) | | Packaging Dimensions (mm): | 299mm x 467mm x 523mm (W x H x D) | | Net Weight (KGs): | 4.8 KGs | | Gross Weight (KGs): | 6 KGs |
|
